When low water pressure gets you down, power it up with the GIANTZ 5-stage Water Pump. It's the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You'll find our 5-stage water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required.
The GIANTZ 5-stage Water Pump features an IP rated commercial motor, full stainless steel pump body, cast iron ends, one-inch inlet and outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in run-dry thermal protection.
Pumping out at a rate of 9000L/hr with a 64m head, the 2500W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any 240V socket.
Whether you're using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one.
Features
Powerful 2500W self-priming multi-stage pump
Garden irrigation, farm irrigation & home water supply
100% duty cycle - Designed for continuous operation
Rust resistant stainless steel pump body w/ cast iron ends
Fully automatic operation on/off controller
Huge 64m head - Perfect for applications over two stories
Anti-corrosive alloy motor housing, ceramic and carbon seals
Built-in thermal protection
Efficient cooling system
Highly conductive copper motor – Efficient & low heat generation
Corrossion resistant brass connector
Leak proof rubber ring
Easy connecting plug and cable
Fully automatic pressure controller
Adjustable start-up pressure
Australian standard cable and plug
1 year warranty – We are always ready to back you up
Specifications:
Pump:
Maximum Power: 2500W / 3.5HP
Maximum Flow: 150L/min, 9,000L/hr
Maximum Head: 64m
Stage: 5 stages
Plug & Cord: SAA 250V/10A *0.6m
Brass connector: 1"
Inlet/outlet: 1"
Casing: stainless steel
Motor: Copper wire
Protection class: IP44
Mechanical Seal: Ceramic/ Carbon
Controller:
Voltage: 220/240V
Frequency: 50/60Hz
Maximum current: 10A
Maximum water temperature: 60 degrees
Starting pressure: 1.5-3 bar
Maximum. pressure for use: 10 bar
Protection grade: IP65
Inlet and outlet size: 1" (25mm)
Dimensions: 22 x 15 x 15cm
Colour: Black
Pump weight: 15.5kg
Controller weight: 1.5kg
Package Content
(1) 5 Stage Water Pump x1
(1) Pump Controller x1
This product comes with 1 year warranty
